Onboard Device - Acorp 4865PE Manual

Chapter 2
OnChip Serial ATA
Use this item to select the onchip serial ATA mode.
The Choices: Disabled; Auto; Combined Mode; Enhanced
Mode; SATA only
Serial ATA port0 Mode
If OnChip Serial ATA is set at "Manual", use this item to select
the serial ATA port mode.
The Choices: Primary Master/Slave; Secondary Master/Slave;
SATA0 Master; SATA1 Master; Primary Master; Secondary
Master
Serial ATA port1 Mode
If OnChip Serial ATA is set at "Manual", use this item to select
the serial ATA port mode.
The Choices: Primary Master/Slave; Secondary Master/Slave;
SATA0 Master; SATA1 Master; Primary Master; Secondary
Master

2.6.2 Onboard Device

Press <Enter> on the item "Onboard Device to configuree
the onboard USB, audio devices etc. The following menu ap-
pears for user's configuration:
Phoenix - AwardBIOS CMOS Setup Utility
USB Controller
USB 2.0 Controller
USB Keyboard Support
USB Mouse Support
AC97 Audio
AC97 Modem
RTL 8100 LAN chip (optional)
←→↑↓: Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults
OnChip IDE Device
Enabled
Enqbled
Enabled
Disabled
Auto
Auto
Disabled
2-46
4865PE BIOS Setup
Item Help
F7:Optimized Defaults