Table of Contents
Advertisement
Chapter 2
Chapter 2
Chapter 2
Chapter 2
Chapter 2
2.7 PnP/PCI Configurations
This section describes configuring the PCI bus system. PCI
or Personal Computer Interconnect,is a system which allows
I/O devices to operate at speeds nearing the speed of the
CPU itself uses when communicating with its own special
components. This section covers some very technical items
and it is strongly recommended that only experienced uses
should make any changes to the default settings.
¡·Figure 7. PnP/PCI Configurations
¡·
¡·
¡·
¡·
CMOS Setup Utility-Copyright (C) 1984-2001 Award Software
PnP/PCI Configurations
PNP OS Installed
Reset Configuration Data
Resources Controlled By
IRQ Resources
PCI/VGA Palette Snoop
Assign IRQ For VGA
Assign IRQ For USB
←→↑↓: Move
Enter:Select
F1:General Help
F5:Previous Values
F7:Optimized Defaults
PNP OS Installed
When set to YES, BIOS will only initialize the PnP cards
used for booting (VGA, IDE, SCSI). The rest of the cards
will be initialized by the PnP operating system like
Windows 95. When set to No, BIOS will initialize all the
PnP cards. Therefore for non-PnP operating systems
(DOS, Netware), this option must be set to No.
No
Item Help
Disabled
Menu Level
Auto(ESCD)
Select Yes if
Press Enter
you are using a
Plug and Play
capable
operating system
Disabled
select No if you
Enabled
need the BIOS
Enabled
to configure non-
boot devices
+/-/PU/PD:Value
F10:Save
ESC:Exit
F6:Fail-Safe Defaults
2-29
2-29
2-29
2-29
2-29
BIOS Setup
BIOS Setup
BIOS Setup
BIOS Setup
BIOS Setup
Advertisement
Table of Contents
