General Functionality Issues And Limitations - Fujitsu SPARC Enterprise M3000 Product Notes

When you use the XSCF Web under the Internet Explorer 8 or Firefox 3
environment, if a plug-in such as the search tool installed with the browser,
disable the pop-up blocking.
When you use XSCF Web under the Firefox 3 environment and attempt to log in
■
to XSCF, you may be prompted by the browser to save the login ID/password. In
this case, do not save the login ID/password. If you save the login ID/password,
the stored data can be displayed unexpectedly on the LDAP, SMTP and REMCS
web pages.
Use one of two settings described below, to disable the browser's ID/password
remember function:
Disable the entire browser ID/password remember function
■
Click on the [Tools] menu, and select [Preferences]. On the [Security] panel, see
[Passwords] and uncheck the "Remember passwords for sites" checkbox.
Designate the XSCF Web address as an exception to the ID/password save
■
operation
Click on the [Tools] menu, and select [Preferences]. On the [Security] panel, see
[Passwords] and check the "Remember passwords for sites" checkbox. Then, on
the dialog for the ID/password saving which appears in the login attempt to
XSCF, click the "Never for This Site" button. As a result, the XSCF Web address
will be registered in the "Exceptions" list to the ID/password save operation,
and the dialog to prompt the ID/password saving will no longer be displayed
in the subsequent login attempts to XSCF.

General Functionality Issues and Limitations

The log archive feature by the setarchiving(8) and the showarchiving(8)
■
commands, and the Log Archives menu of XSCF Web is not supported.
When you use the external power control interface of the external power
■
controller, the following notification signals are not supported:
The OS panic or the server hardware error signal (*CPUN/RTNU)
■
The server hardware error signal (power fail, temperature error, and fan error)
■
(*ALARM)
You cannot use the following user account names, as they are reserved for system
■
use: root, bin, daemon, adm, operator, nobody, sshd, rpc, rpcuser, ldap,
apache, ntp, admin, proxyuser, and default.
XSCF-LAN is compliant with auto-negotiation. When you connect XSCF-LAN
■
and the network device which has been fixed to the full-duplex mode, according
to the IEEE 802.3 rule, XSCF-LAN communicates in the half-duplex mode. Due to
this, network communication speed may slow down or communication error may
occur. Do not fail to set the network device which connects with XSCF-LAN to the
auto-negotiation mode.
General Information About XCP 1093 7