Maintenance; Print Pad Maintenance - 3D Systems CUBE Quick Start Manual

MAINTENANCE

PRINT PAD MAINTENANCE

Auto Level and Auto Gap can be affected by a residual glue or print material adhered to the print pad or
if the print pad is too shiny.
1. Select PLATE
2. Using the fine-grit sandpaper, buff the print pad.
NOTE: Refer to the section titled Clean The Print
Pad for specific instructions.
NOTE: Ensure the print pad is clean and dry
before installing it in the printer.
checkmark
3. Select the
4. Perform the Auto Level and Auto Gap procedures.
MAINTENANCE.
to continue.
23