3D Systems CUBE Quick Start Manual page 8

3rd generation

Hide thumbs Also See for CUBE:

Table of Contents

Raise the print platform (A) and remove the spacer (B)

from the printer.

Open the accessories box and unpack the material cartridges, the USB mass storage device,

the power supply, cord, and the Cube Glue bottle.

Connect the power supply cable to the power inlet port

(A) on the printer.

NOTE: Ensure the connection is secure. The

cable should lock in place. To remove the

cable, pull back on the outer cable end and

carefully pull it out from the printer.

Connect the power cord to utility power and to the power

supply.

NOTE: Ensure the connection is secure.

10.

Power on the Cube by pressing the button next to the touchscreen display.

Table of Contents