Installing The Cd Or Dvd Backplane - IBM 7940 Problem Determination And Service Manual

Installing the CD or DVD backplane

To install the CD or DVD backplane, complete the following steps.
CD or DVD drive connector
1. Install the CD or DVD backplane in the server and secure it with the two
2. Connect the signal cable and the power cable to the CD or DVD backplane.
3. Install the CD or DVD drive (see "Installing the CD or DVD drive" on page 38), if
4. Install the cover (see "Installing the cover" on page 31).
5. Slide the server into the rack.
6. Reconnect the power cords and any cables that you removed.
7. Turn on the peripheral devices and the server.
52
IBM System x3455 Type 7940 and 7941: Problem Determination and Service Guide
Power cable connector
CD or DVD drive backplane
mounting screws.
one was removed.
CD or DVD drive
cable connector