Removing A Memory Module (Dimm) - IBM 7940 Problem Determination And Service Manual

3. Slide the drive-retention clip into place against the side of the drive.
4. Slide the drive into the server until the drive clicks into place.
5. Install the cover (see "Installing the cover" on page 31).
6. Slide the server into the rack.
7. Reconnect the power cords and any cables that you removed.
8. Turn on the peripheral devices and the server.

Removing a memory module (DIMM)

To remove a DIMM, complete the following steps.
1. Read the safety information that begins on page vii and "Installation guidelines"
Drive release
button
CD or DVD drive
on page 29.
CD or DVD drive
Drive
retention clip
Slide the clip into
place against the drive
Chapter 4. Removing and replacing server components
39