Installing A Cd Or Dvd Drive - IBM x3200 4362 User Manual

Installing a CD or DVD drive

To install a CD or DVD drive, complete the following steps:
28
System x3200 Types 4362 and 4363: User's Guide
Drive retainer clip
1. Read the safety information that begins on page v and "Installation guidelines"
on page 18.
2. Turn off the server and peripheral devices, and disconnect the power cords
and all external cables.
3. Remove the side cover (see "Removing the side cover" on page 21).
4. Remove the two-piece bezel (see "Removing the two-piece bezel" on page
22).
5. Use a screwdriver to pry the filler panel and EMC shield away from the server.
EMC shield
Filler panel
Tape drive