Installing A Cd Or Cd/Dvd Combination Drive - IBM System x3250 4364 Problem Determination And Service Manual

4. Remove the retention clip from the drive and save for future use.
5. If you are instructed to return the CD or CD/DVD drive, follow all packaging

Installing a CD or CD/DVD combination drive

To install the replacement CD or CD/DVD combination drive, complete the following
steps:
1. Read the safety information that begins on page vii and "Installation guidelines"
2. Turn off the server and peripheral devices, and disconnect the power cords and
3. Follow the instructions that come with the drive to set any jumpers or switches.
4. Attach the drive-retention clip that you removed in "Removing a CD or CD/DVD
5. Slide the drive into the CD/DVD drive bay until the drive clicks into place.
6. Replace the cover (see "Installing the cover" on page 29).
7. Slide the server into the rack.
8. Connect the cables and power cords.
9. Turn on all attached devices and the server.
instructions, and use any packaging materials for shipping that are supplied to
you.
on page 25.
all external cables. Remove the cover (see "Removing the cover" on page 28).
combination drive" on page 38 to the side of the drive.
Chapter 4. Removing and replacing server components
39