Table of Contents
Advertisement
Installing the front hard disk drive cage assembly
To install the front hard disk drive cage assembly, complete the following steps.
1. Read the safety information that begins on page vii and "Installation guidelines"
2. If you removed a hard disk drive, reinstall it (see "Installing the front hard disk
3. Insert the drive-cage assembly into the server; then, slide the drive-cage
4. Close the drive-cage assembly retention latch.
5. Install the cover (see "Installing the cover" on page 31).
6. Slide the server into the rack.
7. Reconnect the power cords and any cables that you removed.
8. Turn on the peripheral devices and the server.
9. If you are instructed to return the disk drive cage assembly, follow all packaging
54
IBM System x3455 Type 7940 and 7941: Problem Determination and Service Guide
on page 29.
drive" on page 57).
assembly forward until it seats securely.
instructions, and use any packaging materials for shipping that are supplied to
you.
Retention latch
Hard disk drive
tray assembly
Advertisement
Table of Contents
