Secuvision D32-16POE User Manual page 54

Symbol and function Definitions:
1 Channel indicator
4 Remote Manual Record
7 Client Record
10 Color
Screen display mode
Snap pictures:
The system will automatically capture pictures and save those pictures in the computer by
clicking "Snap"
ConfigurationLocal configuration.
Color adjustment:
Drag the slide bar to adjust Brightness, Contrast, Hue, and Saturation. Click Default to reset
them to original value.
Buttons
PTZ control:
Please connect speed dome to the device via RS485 firstly, make sure the protocol of the
speed dome is supported by the device and set the relative parameters manually. User can
control the dome up, down, right, left or stop rotating on Control Center, adjust rotation speed,
Iris and zoom, focus on the dome, and set the presets, etc.
Buttons definition:
Buttons
NVR User Manual
2 Screen display mode
5 Snap
8 Playback
11 P.T.Z control
icon, User should set up the path for those pictures in the
Drag the scroll bar to adjust the brightness of channel
Drag the scroll bar to adjust the contrast of channel
Drag the scroll bar to adjust the saturation of channel
Drag the scroll bar to adjust the hue of channel
Click this button to recover the default value of brightness,
contrast, saturation and hue
Save the adjustment
to rotate the dome upwards.
up-left. to rotate the dome diagonally up-right
dome downwards
rotate the dome diagonally down-right
left to rotate the dome towards right
Drag the scroll bar to adjust rotating speed of the dome.
'Iris' button. Click
3 Volume
6 Start talking
9 Master/sub stream status
Description
Description
to rotate the dome diagonally
to rotate the dome diagonally down-left
to rotate the dome towards
to stop rotating the dome.
button near 'Iris' button to increase light of
49
to rotate the
to