Secuvision D32-16POE User Manual page 18

NVR User Manual
Note: If the network of IP cameras and NVR are in LAN, their IP address must be in the
same network segment. For example: If the IP address of NVR is 192.168.011.003, the
IP address of IP camera must be 192.168.011.XXX.
Fig 4-3 Modify IP Address
Checkmark the searched devices and click "OK" button to return to the previous
③
interface. Click "Apply" button and then the added devices will be listed in the device
management interface. "Connected" status means connecting the device successfully
and you will see the live image. You may select the added device and click "Setup"
button to modify channel, IP address of the device as shown in Fig 4-5.
Fig 4-4 Search Devices
Fig 4-5 Modify Devices
13