SMTP Server/Port: The name and port number of SMTP server. You can set up SSL check
(such as Gmail) according to actual needs.
5.6.3 Server
This function is mainly used for connecting ECMS/NVMS. The setting steps are as follows:
In the server interface, select "Enable" as shown in the Fig 5-25.
①
②
Check the IP address and port of the transfer media server in the ECMS/NVMS. The
default server port for auto report is 2009. If it is modified, please go to the transfer
media interface to check.
③
Enable the auto report in the ECMS/NVMS when adding a new device. Then self-define
device ID and input the remaining information of the device in the ECMS/NVMS.
④
Input the above-mentioned server IP, server port and device ID in the server interface.
Then click "Apply" button to save the setting. Now, the ECMS/NVMS system will
automatically connect this device.
5.6.4 NAT
①
Go to Main MenuSetupNetworkNAT interface. Refer to Fig 5-26.
②
Enable NAT and input the NAT Server (The default NAT Server is www.autonat.com).
Click "Apply" to save the settings.
③
NVR User Manual
Fig 5-24 Network Configuration-Email
Fig 5-25 Network Configuration-Server
31