Table of Contents
Advertisement
towards the IR receiver on the front panel, press the number key 8 twice on the remote, input
device ID of the NVR to be controlled (Range from: 0-65535; the default device ID is 0) and
press ENTER to confirm.
You can check the device ID of a NVR from System SetupBasicDevice ID. You can also
set multiple NVRs with the same device ID however this can cause interference if the NVRs
are kept close to each other.
The interface of remote controller is shown in Fig 2-2 Remote Controller.
Fig 2-2 Remote Controller
Note: You shall press P.T.Z button to enter PTZ setting mode, choose a channel and
press P.T.Z button again to hide the P.T.Z control panel. Then you can press preset,
cruise, track, wiper or light button to enable the relevant function.
NVR User Manual
Button
Switch off—to stop NVR. Use it before turning off the
Power
power
Button
Record Button
To record manually
-/-- /0-9 Digital
Input number or choose camera
Button
Fn1 Button
Unavailable temporarily
Multi Button
To choose multi screen display mode
Next Button
To switch the live image
SEQ
To go to auto dwell mode
Audio
To enable audio output in live mode
Switch
To switch the output between BNC and VGA
Direction button
To move cursor in setup or pan/title PTZ
Enter Button
To confirm the choice or setup
Menu Button
To go to menu
Exit Button
To exit the current interface
Focus/IRIS/Zoo
To control PTZ camera. Move camera/zoom/IRIS/Focus
m/PTZ
Preset Button
To go to preset setting in PTZ mode
Cruise Button
To go to cruise setting in PTZ mode
Track Button
To go to track setting in PTZ mode
Wiper Button
To enable wiper function in PTZ mode
Light Button
To enable light function in PTZ mode
Clear Button
To return to the previous interface
Fn2 Button
Unavailable temporarily
Get information about NVR like firmware version, HDD
Info Button
information
To
Section/Next Section/Rewind/Fast Forward
Snap Button
To take snapshots manually
Search Button
To go to search mode
Cut Button
To set the start/end time for backup in playback mode
Backup Button
To go to backup mode
Zoom Button
To zoom in the images
PIP Button
To go to picture in picture setting mode
7
Function
control
playback.
Play/Pause/Stop/Previous
Advertisement
Table of Contents
