Upgrade; Logoff - Secuvision D32-16POE User Manual

problems of the disk and warn so as to protect its data.

7.4 Upgrade

The NVR can be upgraded by using USB flash drive. Get the upgrading software from your
vendor when there is a new software version.
Upgrade Steps:
①
Copy the upgrade software which gets from vendor into the USB (2.0) storage device.
②
Connect the USB flash drive to the USB port.
③
Go to Main MenuUpgrade tab. Then the upgrade software name would be displayed
in the upgrade list box.
④
Select that software and then click upgrade button. It will upgrade automatically.
Note: Please wait for a while when the system reboots. Never cut off power during
upgrading. The original configuration will be reserved after upgrade.

7.5 Logoff

Go to Main Menu  Logoff tab. A log off dialogue box will pop up. The device will log off
by clicking "OK" button. If you want to log in again, click Main Menu icon to go to user
name and password to re-login.
NVR User Manual
43