Table of Contents
Advertisement
In this interface, you can scan the QRCODE through the mobile phone. Refer to Fig 7-2.
7.2 Manual Alarm
In this interface, user can trigger a manual alarm.
7.3 Disk Management
1.
Format the disk
①
Go to disk management tab.
②
Click Refresh button to refresh the disk information in the list box.
③
Select a hard disk and click Format button to start format.
Note: Please format the hard disk before recording. If not formatted, it will show the
status of the disk-free space, and total space at the bottom of screen. All recorded files in
the hard disk will be lost once it is formatted.
2.
Advanced
User may check model, S/N, firmware, health status of the disk in this interface. User also can
monitor the temperature, internal circuit, dielectric material of the disk, analysis the potential
NVR User Manual
Fig 7-1 Information Configuration
Fig 7-2 Information Configuration-QRCode
42
Advertisement
Table of Contents
