Secuvision D32-16POE User Manual page 19

To add IP cameras via WAN:
①
Please go to Main Menu
Click "Add" button to pop up a window as shown in Fig 4-6. You need to check
②
"Enable" box, select channel and manufacturer and manually input IP address, server
port, username and password of this device.
Note: If the NVR and the IP cameras you want to add are both in WAN, the IP address of
the IP camera input here must be WAN IP.
NVR User Manual

IP Camera tab. Refer to Fig 4-1.
Fig 4-6 Add Device
14