Time; Stamp - Secuvision D32-16POE User Manual

will automatically adjust it.

5.3.3 Time

①
Go to Main MenuSetupRecordTime interface to set recording time. Refer to Fig
5-12.
Set Pre-alarm record time and post-alarm record time. Select "All" to set the same
②
settings for all channels.
Click "Apply" to save the setting.
③
Pre-alarm Record Time: Set the time in seconds to pre-record before the actual recording
begins.
Post-alarm Record Time: Set the time in seconds to post-record after the actual recording
has finished, five options: 10s, 15s, 20s, 30s, 60s, 120s, 180s and 300s.
Expire Time: Set the expiration time for recorded video. If the set date is overdue, the
recorded files will be deleted automatically.

5.3.4 Stamp

This provides an option to enable or disable the Camera Name and the Time stamp on the
video. The user can also choose a position for the stamp on the screen.
To set up stamp as follows:
①
Go to Main MenuSetupRecordStamp interface. Refer to Fig 5-13.
②
Checkmark camera name and time stamp. Click Setting button to set up the position of
the stamp. You can drag the camera name and time stamp at random positions as shown
below.
Select "All" to set up all channels with the same parameters.
③
NVR User Manual
Fig 5-12 Record Configuration-Time
22