Date & Time; Dst - Secuvision D32-16POE User Manual

user to do basic setup.
Video Output: Resolution of live display interface.
Language: To set up the menu language.
Note: After changing the language and video output, the device needs to login again.
Logout After (Minutes): You can set up the screen interval time (30s, 60s, 180s, 300s). If
there is no any operation within the setting period, the device will auto logout and return to the
login interface.
No Image When Logout: If selected, there will be no image showing when logout.
5.1.2 Date & Time
①
Go to Main MenuSetupBasicDate & Time tab. Refer to Fig 5-4.
Set the date format, time format, time zone in this interface; checkmark "Sync Time
②
With NTP Server" to refresh NTP Server date. You can adjust system date manually
Click "Apply" button to save the settings.
③

5.1.3 DST

①
Go to Main MenuSetupBasicDST interface. Refer to Fig 5-5.
②
In this interface, enable daylight saving time, time offset, mode, start & end
month/week/date, etc.
Click "Apply" button to save the settings.
③
NVR User Manual
Fig 5-4 Basic Configuration-Date & Time
17