②
Click Setting button to go to live image.
③
Press and drag the left mouse button to set mask area as shown below.
④
Right click to exit the mask setting interface.
⑤
Click Apply button to save the setting.
To delete mask area:
①
Click "Setting" button in the mask interface.
②
Select a certain masked area and double click to delete that masked area.
③
Then click "Apply" button to save the setting.
5.3 Record Configuration
Record configuration includes six sub menus: enable, record bit rate, time, recycle record,
stamp and snap.
Before Configuration, please make sure your NVR has been installed with HDD and has
completed its initialization.
5.3.1 Enable
①
Go to Main MenuSetupRecordEnable tab. Refer to Fig 5-10.
②
Checkmark record and audio.
NVR User Manual
Fig 5-8 Live Configuration-Mask
Fig 5-9 Setting Mask Area
20