Recycle Record; Snap; Schedule Configuration; Schedule - Secuvision D32-16POE User Manual

5.3.5 Recycle Record

This option is used to recycle the HDD space once it is full. If enabled, the system will
automatically delete the old records and recycle the space if it is completely utilized. The
setting steps are as follows:
①
Go to Main MenuSetupRecordRecycle Record interface.
②
Checkmark recycle record to activate auto recycling. If the option is disabled or not
selected, the NVR would stop recording once HDD is full.
Click "Apply" button to save the setting.
③

5.3.6 Snap

In this interface, user can set up resolution, quality, snap interval, snap number.

5.4 Schedule Configuration

Schedule configuration includes three sub menus: schedule, motion and sensor.

5.4.1 Schedule

This tab allows defining schedule for normal recording for seven days of a week, 24 hours of a
day. Every row denotes an hourly timeline for a day. Click the grid to do relevant setup. A
highlighted area denotes selected timeline. Operate the following steps to set schedule:
①
Go to Main MenuSetupScheduleSchedule interface. Refer to Fig 5-14.
NVR User Manual
Fig 5-13 Record Configuration-Stamp
Before drag After drag
23