Customizing The Function Settings; Setting Procedure - Toshiba SD-H400-S-TU Installation Manual

_ _
C_h_a~p=----t_e_r_4
_
~~
Customizing the Function Settings
You can change the default settings to customize performance to your preference.
~ Setting procedure Dm~lllt[DMII~:U
5
Repeat steps 3 and 4 to change other settings.
To select another operation, go back to step 2.
1 Press DVD SETUP during stop.
DVDSETUP
o
The following on-screen display appears.
Picture
~Mlifu€@[m;;%[4~'Jf1j
Progressive4:30utput Full
Pl'OgressrveConversion Auto
POllse/StiU Auto
][
3
4
Press ... /
T
to select the setting you want to change,
then press SELECTtENTER.
Change the selection by ... /
T
or other buttons, by
referring to the corresponding pages
@ID,
then press
SELECTtENTER.
/(~'\
i \. \
,.,Q.'"I
\ Vi)'
\;~
~
(~.~/'.\>\
\)26)
Press DVD SETUP.
2 Press ~ / ~ to select a symbol for the setting you want to change.
(See the next page.)
6
DVD SETUP
o
The on-screen display disappears.
36
Picture performance
settings
Output sound settings
Language settings
Display settings
Operational settings
Initializing
• To return to the previous display
Press RETURN.
RETURN
o
Notes
• The on-screen display disappears also when you select
"[lit!"
and press the
SELECT/ENTER button.
• The DVD SETUP button can function even during normal playback, however
some operations may be inaccessible, and a message will appear. In this case, try
again after playback is stopped.