the screws included. The rack fastening holes protrude at
the sides.
Figure 24: Rack mounting ZINTO A 1500, ZINTO A 2000 - step 3
5.) The front panels can now be re-fitted.
Figure 25: Rack mounting ZINTO A 1500, ZINTO A 2000 - step 4
6.) The second mounting frame (narrow version) is now fixed
to the rear of the two components using the screws in-
cluded. This frame also joins the two components to-
gether.
7.) Then re-make the electrical connection between UPS and
Batterypack. The control unit's module with the output
sockets can be hooked in the recess provided on the bat-
terypack.
Manual-ZintoA_final_ger_engl_it_20081017.doc
97 / 181
05.11.2008, Dipl.-Ing. S. Spitzley