Online USV ZINTO A 800 User Manual page 78

Controls:
Button
TEST
Set I/O
Table 1: Controls
Indicators:
The significance of the indicators is explained in the following
table:
LED
Line
Battery
and scale indication
and scale indication
Inverter
Manual-ZintoA_final_ger_engl_it_20081017.doc
Button for switching on and off the UPS.
Keep button pressed for 3 sec.
This button has 2 functions:
3.) Manual starting of the system test.
4.) Deactivation / reactivation of the
acoustic alarm.
Button for starting configuration. Configura-
tion refers to the programming of the input
sensitivity and output voltage.
Button for accepting the configuration.
Optical indication of the normal
mode, i.e. mains voltage within
tolerance.
Optical indication of the battery
mode, i.e. mains voltage out of
tolerance and UPS in the battery
mode.
Optical indication of the utilisation
in %.
Optical indication of the remaining
battery capacity / power backup
time in %. Only active in the bat-
tery mode.
Optical indication of a malfunction
in the inverter.
77 / 181
Function
Significance
05/11/2008, Dipl.-Ing. S. Spitzley