Battery Replacement Zinto A 1500; Zinto A 2000 - Online USV ZINTO A 800 User Manual

10.3.2 Battery replacement ZINTO A 1500,

ZINTO A 2000

1.) Undo the bottom screw and then carefully remove the
plastic panel on the battery module.
Figure 29: Battery replacement ZINTO A 1500, ZINTO A 2000 - step 1
2.) Disconnect battery connector and remove retaining plate
by sliding sideways to the right.
Figure 30: Battery replacement ZINTO A 1500, ZINTO A 2000 - step 2
3.) Remove the new battery blocks from the packaging, posi-
tion as per the batteries originally fitted in the UPS, fasten
together and make electrical connection between the
blocks.
Alternatively, use genuine ONLINE replacement bat-
tery.
4.) Carefully fit new battery unit in the slot in the UPS system
and push in slowly to the stop. Then re-fit and position the
retaining plate removed previously. Now re-connect the
battery connector. Pay attention to the polarity: red-red,
black-black.
5.) Then re-fit the panel. During this process pay attention to
the correct seating of the plastic clips and fasten the panel
with the screw removed at the start.
Manual-ZintoA_final_ger_engl_it_20081017.doc
109 / 181
05.11.2008, Dipl.-Ing. S. Spitzley