Online USV ZINTO A 800 User Manual page 79

LED
General
Battery
Overload
Output
220V / 230V / 240V
Input
Normal / Generator /
Wide Range
Table 2: Indicators
6.2.1.3 Rear of device:
The rear of the control units varies.
They have:
• An input connector, plug (male).
• Input and / or output fuse protection.
• Output sockets: 10A sockets as well as
16A sockets on 3kVA control unit.
• Socket for connecting an external batterypack (from
1.5kVA).
• RJ45 socket for data line protection.
• USB socket and DB9 socket (male) for RS-232 communi-
cation. Floating contacts also via DB9 socket.
• Terminal block for emergency power off (from 1.5kVA).
• Slot for optional interface cards (from 1.5kVA), e.g.
SNMP / network management card basic, SNMP / network
management card professional.
Manual-ZintoA_final_ger_engl_it_20081017.doc
Significance
Optical indication of a general
malfunction, e.g. overtemperature,
short circuit, etc.
Optical indication of a faulty bat-
tery or a discharged battery.
Optical indication that the overload
time limit has been exceeded.
Optical indication of the output
voltage. Can be changed using the
UPS menu or in software.
Optical indication of the input sen-
sitivity. Can be changed using the
UPS menu or in software.
78 / 181
05.11.2008, Dipl.-Ing. S. Spitzley