Rack Installation Zinto A 1500 / 2000 - Online USV ZINTO A 800 User Manual

8.2.2 Rack installation ZINTO A 1500 / 2000

The special housing shape of ZINTO A 1500 and ZINTO A
2000 is designed such that the two components (control unit
and batterypack) can be arranged side by side in the rack
installation. To ensure the greatest possible stability, the two
components must be connected together. For this purpose the
mounting frames (optional available) are to be used. The
mounting frames are different: one for the front (wide version)
and the other for the rear (narrow version).
To install proceed as follows:
1.) Place control unit and batterypack on a flat, clean surface.
2.) Undo screws for fixing the front panel. These screws are
in the middle on the underside of the related front panel.
Figure 22: Rack mounting ZINTO A 1500, ZINTO A 2000 - step 1
3.) Remove front panels on both components.
Figure 23: Rack mounting ZINTO A 1500, ZINTO A 2000 - step 2
4.) To connect the two components, fix the mounting frame
(wide version) to the open front on the two devices using
Manual-ZintoA_final_ger_engl_it_20081017.doc
96 / 181
05.11.2008, Dipl.-Ing. S. Spitzley