3gb33001.fm5 Page 35 Monday, August 20, 2001 3:48 PM
INSTALLATION (FOR 60 cm DEEP MODELS ONLY)
1.Minimum fixed wall position.
2.Recommended locations for electrical and water connections.
3. For full-overlay cabinet doors and a trim kit, the height of the opening must be 183.2 cm.
• If you are installing the refrigerator to fit flush with the front of the base cabinets, all shoe molding
and baseboards must be removed from the rear of the refrigerator opening.
• The water hookup and electrical hookup must be placed near the bottom of the refrigerator.
• A trim kit is available for those installations where the refrigerator will not fit flush. See the "Assistance
or Service" section for ordering information.
NOTE: Do not install the refrigerator near an oven, radiator or other heat source, nor in a location where
the temperature will fall below 55°F (13°C).