Connecting Dimensions And Location Of Connections; 1) Oil Circuit (Engine) - Rotax 912 ULS 3 Installation Manual

13.5) Connecting dimensions and location of connections

■ CAUTION:
◆ NOTE:

13.5.1) Oil circuit (engine)

Effectivity: 912 Series
Edition 1 / Rev. 0
BRP-Rotax
INSTALLATION MANUAL
Utilize the full slip-on length for hose connections. Secure
hoses with suitable screw clamp or by crimp connection.
The oil pipeline connections are optional as UNF-thread (AN-
8). See SI-912-003.
See Fig. 44, 45, 46 and 47.
Depending on engine certification, the oil pump inlet connectors can
vary:
- 912 A/F/S .. thread M18 - optional UNF-thread (AN-8)
- 912 UL/ULS inlet nipple - optional M18 or UNF-thread (AN-8)
Oil pump (inlet) (1) .................. thread M18 x 1,5 x 11
◆ NOTE:
Suitable for use of a swivel joint. See Fig. 48.
Tightening torque of inlet line: .. 25 Nm (18.5 ft.lb)
1
Fig. 44
09123
page 72
May 01/2007