3Com SuperStack II Switch 3000 10/100 User Manual page 69

Setting Up the Console Port 4-27
Speed 1200 / 2400 / 4800 / 9600 / 19200
This field allows you to select the correct line speed
(baud rate) for your terminal or modem. If you
have enabled auto-configuration, the line speed is
set automatically.
Char Size 8 This read-only field displays the charac-
ter bit (data bit) size for the Switch. You should set
your terminal to the same value.
Parity NONE This read-only field displays the parity
setting for the Switch. You should configure your
terminal to the same setting.
Stop Bit 1 This read-only field displays the stop bit
setting for the Switch. You should configure your
terminal to the same setting.