Unit Defaults - 3Com SuperStack II Switch 3000 10/100 User Manual

Unit Defaults

The following table shows the factory defaults for
the Switch 3000 10/100 features.
Enabled
Port Status
Port Speed Fixed 10BASE-T / 100BASE-TX ports are
auto-negotiated, Fast Ethernet Plug-in Mod-
ule ports are 100Mbps, ATM OC-3c Plug-in
Module ports are 155Mbps.
Intelligent Flow Enabled
Management
Duplex Mode Fixed 10BASE-T / 100BASE-TX ports are
auto-negotiated, Fast Ethernet Plug-in Mod-
ule ports are half duplex.
Virtual LANs All ports use Port VLAN Mode and belong
to the Default VLAN (VLAN 1)
PACE Disabled
Disabled
Spanning Tree (STP)
Power On Self Test Normal (Fast Boot)
(POST)
System Alarm Enabled
(broadcast band-
High threshold: 20% — Notify and blip
width used)
Low threshold: 10% — No action
System Alarm Enabled
(errors per 10,000
High threshold: 2% — Notify
packets)
Low threshold: 1% — No action
System Alarm Enabled
(bandwidth used)
High threshold: 85% — No action
Low threshold: 50% — No action
Enabled
System Alarm
(percentage of
High threshold: 85% — No action
frames forwarded)
Low threshold: 50% — No action
Unit Defaults 1-11