Connecting A Lcd Panel; Available Video Modes; Standard Ibm-Compatible Vga Modes - Kontron MOPSlcdLX User Manual

Chapter 9
9.4

Connecting a LCD Panel

To determine whether your panel display is supported, check the Kontron Web site for panel lists. We regu-
larly update the list of panels that have been tested with the MOPSlcdLX.
If you use one of those adapters supplied by Kontron, configuration is easy:
‚
Check whether you have the correct adapter and cable for the panel you plan to use. Inspect
the cable for damages.
ƒ
Disconnect the power from your system.
„
Connect the panel adapter to the LCD Panel connector (JILI interface) on the MOPSlcdLX.
…
Connect the other end of the cable to your display.
†
Connect the backlight converter.
‡
Supply power to your system.
ˆ
If no image appears on your display, connect a CRT monitor to the CRT connector.
‰
If necessary program the EEPROM on the JILI cable with the matching configuration data.
Š
If you still do not see improvement, consider contacting the dealer for technical support.
9.5

Available Video Modes

The following list shows the video modes supported by the graphics controller with maximum frame buffer
size. When configured for saller frame buffers and/or using a LCD panel on the JILI interface, not all of the
video modes listed below may be available. Capability depends on system configuration and on display
capabilities. Different operating systems also may not support all listed modes by the available drivers.
9.5.1

Standard IBM-Compatible VGA Modes

Video Mode
00h/01h
02h/03h
04h/05h
06h
07h
0Dh
0Eh
0Fh
10h
11h
12h
13h
Kontron User's Guide MOPSlcdLX
Type Characters/Pixels
Text 40x25
Text 80x25
Graphics 320x200
Graphics 640x200
Text 80x25
Graphics 320x200
Graphics 640x200
Graphics 640x350
Graphics 640x350
Graphics 640x480
Graphics 640x480
Graphics 320x200
17
Graphics Interface
Colors
16
16
4
2
Mono
16
16
Mono
16
2
16
256