Table of Contents
Advertisement
Chapter 24
Setup Guide
For more information on the Remote Control usage, refer to the JRC-1 technical manual or Application Note
JRCUsage_E???.PDF, which you can find on the Kontron Web site.
24.11.3
LAN PXE ROM
This optional ROM allows you to boot the MOPSlcdLX over an Ethernet connection. If the onboard LAN PXE
ROM is enabled in the system BIOS Setup, an optional ROM for the Ethernet controller loads into memory
during boot up. A server with Intel PXE boot support is required on the other side of the Ethernet con-
nection. The setup and configuration of the server, including PXE support, is not the responsibility of
Kontron.
The PXE ROM extension is loaded into the first free memory area between C8000h and DFFFFh, and a 48K
block of memory is shadowed.
Kontron User's Guide MOPSlcdLX
47
Advertisement
Table of Contents
