Table of Contents
Advertisement
Chapter 8
8.
PCI BUS Expansion
The MOPSlcdLX is available in different versions with or without PC/104+ bus. On boards with this option a
quad-row socket stack-through connector with a 2mm x 2mm (0.79" x 0.79") pitch that implements the
standard 32-bit PCI bus signals is available.
8.1
Configuration of V
The PCI Bus of the MOPSlcdLX is 3.3V only. The default settings for V
ensured that the PCI expansion cards are types of 3.3V only, Zero-Ohm bridges can be set (see picture 1 and
picture 2). 5V PCI expansion cards can damage the board.
Top Side (Picture 1)
Bottom Side (Picture 2)
Kontron User's Guide MOPSlcdLX
and VCC
I/O
15
PCI BUS Expansion
and VCC are not connected. If it is
I/O
Advertisement
Table of Contents
