Programming Plu Entry Limit Or Price - Sam4s ER-265 Operator's And Programming Manual

Programming PLU Entry Limit or Price

Note: Open PLUs are automatically assigned a 7 digit entry limit. You do not need to
program this section for open PLUs, unless you wish to set a different limit.
If you are programming a open PLU:

If you are programming a preset PLU:

Programming a PLU Entry Limit or Price
1. Turn the control lock to the PGM position.
2. Enter the number of the PLU you wish to program (1-1000), press the PLU key.
3. If the PLU is preset, enter the preset price, up to seven digits (01 to 1234567). (It is
4. Press the X/TIME key.
5. Repeat from step 2 above for each PLU you wish to program.
6. Press the CASH/TEND key to end programming.
80  Advanced Programming Instructions
You can limit errors by setting the maximum amount that may be entered into a PLU.
You can set the preset price. The price you program here is the amount that is
automatically registered when the PLU is entered.
not necessary to enter proceeding zeros. For example enter $1.00 as 100.)
OR
If the PLU is open, enter the highest amount that may be entered into the PLU.
SAM4s ER-265 Operator's and Programming Manual v1.14