Programming Plu Status - Sam4s ER-265 Operator's And Programming Manual

Programming PLU Status

1. Turn the control lock to the PGM position.
2. Enter the number of the PLU you wish to program (1-1000), press the PLU key.
3. Decide if you want a negative, enforced non-add entry, or disabled PLU. If you do
4. Decide if you want a preset or single item PLU. If you do not want any of these
5. Complete the tax status table below by adding the status digits for each tax. Then
7. If you are using a kitchen printer and wish this item to print at the printer, select Yes
8. Press the department key that you want this PLUs' sales added to.
9. Repeat steps 2 through 7 for each PLU you wish to program.
78  Advanced Programming Instructions
not want any of these options, enter 0. If you wish to select any of these options,
complete the table below by adding the status digits for each option. Enter the
resulting digit.
PLU is Negative
Enforce Non-Add
Entry
PLU is Disabled
options, enter 0. If you wish to select any of these options, complete the table below
by adding the status digits for each option. Enter the resulting digit.
PLU is Preset
PL:U is Single Item
enter the resulting tax status code.
Taxable by Rate 1?
Taxable by Rate 2?
Taxable by Rate 3?
here.
Send KP?
Yes = 1
+
No = 0
Yes = 2
+
No = 0
Yes = 4
+
No = 0
=
Yes = 1
+
No = 0
Yes = 2
+
No = 0
=
Yes = 1
+
No = 0
Yes = 2
+
No = 0
Yes = 4
+
No = 0
=
Yes = 1
+
No = 0
=
SAM4s ER-265 Operator's and Programming Manual v1.14