Advanced Operating
Instructions
Clerk Operations
If you wish to use the clerk system, you must first activate the clerk system by setting system option
#16. See "System Option Programming" on page 60. You can activate the clerk system for stay
down or pop-up mode.
Clerk Sign On
To sign on, enter the secret code and press the CLERK key, or press the CLERK key,
Clerk Sign Off
To sign off, enter 0, press the CLERK key.
SAM4s ER-265 Operator's and Programming Manual v1.14
Stay down means that once a clerk is signed on, the same clerk will remain signed on
until a different clerk signs on or the original clerk signs off. A stay down clerk
system might be used when only one operator uses the register at a time, and a different
operator begins when a work shift is changed.
Pop-up means that the clerk is automatically signed off an the end of each transaction.
Therefore, to begin a transaction, you must first sign a clerk on. A pop-up clerk
system might be used in a department store, where several clerks might use the register
during the same shift, and clerk sales information is required.
then enter the secret code and press the CLERK key again.
CLERK
Secret
clerk #
0
CLERK
or
CLERK
Secret
clerk #
Advanced Operating Instructions 29
CLERK