Programming Department Entry Limit Or Price - Sam4s ER-265 Operator's And Programming Manual

Programming Department Entry Limit or Price

Note: Open departments are automatically assigned a 7 digit entry limit. You do not need
to program this section for open departments, unless you wish to set a different limit.
If you are programming a open department:

If you are programming a preset department:

Programming a Department Entry Limit or Price
1. Turn the control lock to the PGM position.
2. If the department is preset, enter the preset price, up to seven digits (01 to 1234567).
3. Press the department key you wish to program.
4. Repeat from step 2 above for each department you wish to set.
5. Press the CASH/TEND key to end programming.
58  Advanced Programming Instructions
You can limit errors by setting the maximum amount that may be entered into a
department.
You can set the preset price. The price you program here is the amount that is
automatically registered when the department key is pressed.
(It is not necessary to enter proceeding zeros. For example enter $1.00 as 100.)
OR,
If the department is open, enter the entry limit you wish to set.
SAM4s ER-265 Operator's and Programming Manual v1.14