System Option Table
NOTE: Shaded areas are the default settings, in other words, the shaded area indicates the
way the register is automatically set up.
Option
No.
1
2
3
4
5
6
7
8
9
10
11
62 Advanced Programming Instructions
SYSTEM OPTION
Print the grand total on X,/Z report.
Print the gross total on X,/Z report.
Reset the consecutive number counter after a Z report.
Reset the Z counter after Z report.
Skip totals with zero value on X,Z report.
Reset the grand total after a Z report.
Print the subtotal when pressed.
Cash must be declared before X/Z report.
Allow X reports
Decimal point position
Select a method for tax printing:
Print Taxable Totals.
Print Taxable Totals.
Print Taxable Totals.
Do not print Taxable Total.
Do not print Taxable Total.
Do not print Taxable Total.
Print tax amounts separately.
Print only total of all taxes.
Do not print tax amounts.
Print tax amounts separately.
Print only total of all taxes.
Do not print tax amounts.
SAM4s ER-265 Operator's and Programming Manual v1.14
STATUS
YES = 0
NO = 1
YES = 0
NO = 1
NO = 0
YES = 1
NO = 0
YES = 1
YES = 0
NO = 1
NO = 0
YES = 1
YES = 0
NO = 1
NO = 0
YES = 1
YES = 0
NO = 1
0 = none
1 = 1 place
2 = 2
places
3 = 3
places
0
1
2
3
4
5