Setting a Register Number
You can program a two digit register number that will print on the lower right corner of each
transaction. If you are using more than one cash register, the register number can be used to
identify the register where the transaction was entered.
To set a register identification number:
1. Turn the control lock to the PGM position.
2. Enter register number and press the #/NS key:
3. Press the CASH/TEND key to end programming.
82 Advanced Programming Instructions
15:40
000081
Register Number
#/NS
CASH/
TEND
03-02-2006
CLERK 1
99
SAM4s ER-265 Operator's and Programming Manual v1.14