Unpacking And Assembly - Agria 5100 Rabbit Original Operating Instructions

Unpacking and Assembly

1 Steering column pin
2 Steering handle
3 Clips
4 Linch pin
5 Washer
6 Electric cable with connector
(on steering handle)
7 Electric connector on engine
8 Bowden cables
9 Guide hook for Bowden cables
Unpacking
and fold down the sides.
Assembly of steering handle
holes (2) onto the steering column pin
(1).
column pin (1).
linch pin (4) through the horizontal hole
in the steering column.
middle position of the side adjustment
mechanism (see page 18).
sired working height (see page 18).
socket (6) (engine safety circuit system).
guide hook (9).
sure the cables are not twisted or
jammed and to avoid clutch problems.
with clips (3) to the steering handle.
Attaching the cutter bar
See instructions on page 20
Starting up
See instructions on page 23
agria Grassland Mower 5100
Open the top of the cardboard box.
Cut the box open on all four corners
Push the steering handle location
Fit the washer (5) onto the steering
Lock the steering handle by fitting the
Notch the steering handle into the
Adjust the steering handle to the de-
Connect the electric cable (7) to
Fit the Bowden cables (8) into the
Inspect again all cable guides to en-
Attach Bowden and electric cables
7