Table of Contents
Advertisement
5. Maintenance
Apart from adhering to operating in-
structions for grassland mowers, it
is also important to observe the fol-
lowing maintenance instructions.
Warning: Only do mainte-
W
nance work with the en-
gine shut off.
To prevent accidental start while
working on the cutter bar or the
engine, always remove the spark
plug connector from the spark
plug.
Machine
Worm Gear
The worm gear is permanently lubri-
cated. Lubricating and servicing is
not necessary.
V-Belts
Inspect the condition of the V-belts
at least once per year.
Remove the mowing drive hood.
To this end, remove the 3 attachment
bolts.
If the V-belts are worn, replace
them
Only use original agria V-belts!
– see "wear parts"
For V-belt replacement and the fol-
lowing adjustment,
- Service
Checking and Adjusting Clutch
Play
Wheel drive
For smooth V-belt clutch operation ensure
the play X on each clutch lever (B/2) is
2–3 mm. Check the clutch play while the
drive is engaged.
Also ensure that the transmission is dis-
engaged when the lever is in position
"0".
If the clutch play needs further adjustment,
set it on the cable-setting screw.
Precision adjustment
Undo locking nut
(2)
Adjust the setting
screw (1) in such a
way that the play on
the clutch control le-
ver is X = 2–3 mm.
Retighten the locking nut (2)
Mowing drive
Mowing drive clutch lever (B/4) adjustment:
The mowing drive is engaged when the
lever is in top po-
sition; the V-belt
must not slip in op-
eration.
The mowing drive is disengaged when
the lever (B/4) is moved down (position "0").
If necessary, adjust the lever by setting the
screw accordingly.
1 Cable set screw
2 Locking nut
agria Grassland Mower 5100
5
27
Hide quick links:
Advertisement
Table of Contents
