Mowing - Agria 5100 Rabbit Original Operating Instructions

4. Commissioning and Operation
Danger zone
4 4
Mowing on
Mowing on
plain surfaces
slopes
For operation on banks,
always turn machine
towards the slope!
max. 20°
(37%)
26

Mowing

Check safety circuit function - Only operate
W
the machine if safety circuit works!
Start engine.
Wear individual protective ear plugs and solid
shoes.
I Remove the knife guard
Slowly move the mowing drive clutch lever (B/4) to
position "mowing" and pull the throttle; the knife starts
operating.
Slightly pull the transmission clutch lever (B/2), un-
lock the pawl (B/3) and release it slowly; the machine
moves forward in mowing operation.
After operation or in the event of blockages:
Release the transmission clutch lever and lock the pawl;
the mower will stop but the knife continues operating. This
will remove any blockages from the cutter bar
Move the mowing drive clutch lever (B/4) to "0"
Shut off the engine
Attach the knife guard
If cleaning becomes necessary during work,
W
shut off the engine and remove the spark
plug connector for safety reasons.
Danger zone
Keep out of the mower's danger zone
W
during starts and operation.
Mowing on Slopes
To prevent the grassland mower from sliding
W
on slopes make sure it is secured by another
person using a bar or a rope. This person must
stay at a higher position than the vehicle and at a
safe distance from the attachment at work.
If possible, always work across the slope.
agria Grassland Mower 5100