3. Devices and Operating Elements
Running Bases on Cutter Bar
The cutter bar is equipped with rigid
skids that are mounted under the cutter
bar. It is possible to attach two height-
adjustable running bases to obtain a
higher stubble.
(Optional equipment
agria item no. 713 22 = 1 pair)
On cutter bar version S re-fit the exist-
ing skid so that it curves upwards (see
fig.).
For height adjustment, loosen the hex
nuts (1) and adjust the running bases
3 3
as required. Then re-tighten the hex
nuts.
For a clean cut, ensure that the running
bases are adjusted to same height.
22
agria Grassland Mower 5100