Starting The Engine - Agria 5100 Rabbit Original Operating Instructions

Grassland mower with reverse speed with honda engine
Table of Contents

Advertisement

4. Commissioning and Operation
4 4
24

Starting the engine

(with the engine in horizontal position)
Check whether all guards are in proper
position.
Move the steering handle to working posi-
tion and tighten the knob screw.
Only operate the machine on the area that
needs mowing, do not turn it on on concrete
or asphalted ground, etc.
Do
W
closed rooms. Exhaust fumes contain
carbon monoxide which acts toxic when
inhaled.
Open the fuel tap (C/11).
Set the speed control lever(A/5) to "START"
("CHOKE"
Do not use the Choke when the engine is
warm or in hot weather.
Move the speed control lever to 1/3 posi-
tion.
Pull the clutch hand lever (B/2) and lock it
with pawl (B/3) (start position).
Move the mowing drive lever (A/4) to posi-
tion "0" (start position).
Pull the starting-rope on handle (C/2) until
you feel the starter clutch engage. Then pull
hard and fast to start the engine. After the
start, let the rope glide back. Do not let it snap.
Warning: To star t the engine,
W
step behind the handlebar and
pull the starter rope towards the rear. Keep
your feet off the cutter bar. Keep off the dan-
ger zone.
agria Grassland Mower 5100
not
start
the
) position.
engine
in

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rabbit 5100 321

Table of Contents