Agria 5100 Rabbit Original Operating Instructions page 10

1. Safety Instructions
During operation the operator must keep
at a distance as defined by the steering
handle, especially when turning the
1
machine.
Riding on the implement during opera-
tion or in transport is not permitted.
If clogging occurs in the implement, turn
off the engine and clean the implement
with an appropriate tool.
In case of damage to the grassland
mower or to the implement, immediately
turn off the engine and have it repaired.
If steering causes problems, immedi-
ately bring the mower to a halt and turn
it off. Have the malfunction removed
without delay.
To prevent the mower from sliding on
slopes, make sure it is secured by an-
other person using a bar or a rope. This
person must be located at a higher po-
sition than the vehicle and at a safe dis-
tance from the attachment at work.
If possible, always work horizontally on
the slope.
End of Operation
Never leave the mower unattended with
the engine running.
Before you leave the grassland mower,
turn off the engine.
Secure grassland mower against unau-
thorized use. If mower is equipped with
ignition key, remove the key. For all other
versions, remove spark plug connector.
10
Implements
Only mount implements with the engine
and PTO switched off.
Always use appropriate tools and wear
gloves when changing implements and
parts thereof.
For mounting and dismounting imple-
ments bring stands into proper position
and ensure stability.
Secure mower and implements against
rolling off (parking brake, wheel chocks).
Beware of injuries while coupling imple-
ments.
Mount implements as specified and only
couple at specified points.
Secure mower and implement against
unauthorized use and rolling off when
you leave the machine. If necessary, in-
stall transport or security devices and
secure.
Mowing Attachment
Handle with care! Sharp blades of the
cutter bar may cause injuries! Remove
knife guards only for mowing and refit
immediately after work has finished.
For transport and storage always mount
the knife guards. Secure finger bars
additionally with tension springs.
Do not transport the dismounted cutter
bar without knife guards.
agria Grassland Mower 5100