Installing A Dimm; Removing A Dimm - Advantech i915GV-INA Series User Manual

1.4.3

Installing a DIMM

Make sure to unplug the power supply before adding or removing DIMMs or
other system components. Failure to do so may cause severe damage to both
the motherboard and the components.
1. Unlock a DIMM socket by pressing
the retaining clips outward.
2. Align a DIMM on the socket such
that the notch on the DIMM matches
the break on the socket.
A DDR2 DIMM is keyed with a notch so that it fits in only one direction. DO
NOT force a DIMM into a socket to avoid damaging the DIMM.
3. Firmly inser t the DIMM into the
socket until the retaining clips snap
back in plac e and the DIM M is
properly seated.
1.4.4

Removing a DIMM

To remove a DIMM:
1. Simultaneously press the retaining
clips outward to unlock the DIMM.
Support the DIMM lightly with your fingers when pressing the retaining clips.
The DIMM might get damaged when it flips out with extra force.
2. Remove the DIMM from the socket.
i915GV-INA
1
Unlocked retaining clip
Locked Retaining Clip
1
DDR2 DIMM notch
2
DDR2 DIMM notch
1
2
1
1-15