Motherboard Overview; Placement Direction; Screw Holes - Advantech i915GV-INA Series User Manual

1.2

Motherboard overview

Before you install the motherboard, study the configuration of your chassis to
ensure that the motherboard fits into it. Refer to the chassis documentation before
installing the mothebroard.
Make sure to unplug the power cord before installing or removing the
motherboard. Failure to do so can cause you physical injury and damage
motherboard components.
1.2.1

Placement direction

When installaing the motherboard, make sure that you place it into the chassis in
the correct orientation. The edge with external ports goes to the rear part of the
chassis as indicated in the image below.
1.2.2

Screw holes

Place eleven (11) screws into the holes indicated by circles to secure the
motherboard to the chassis.
Do not overtighten the screws! Doing so can damage the motherboard.
Place this side towards
the rear of the chassis
i915GV-INA 1-3