Advantech i915GV-INA Series User Manual page 47

Quick Power On Self Test [Enabled]
Select [Enable] to reduce the amount of time required to run the power-on self-test
(POST). A quick POST skips certain steps.
First/Second/Third Boot Device
Allows you to assign the boot device priority. Configuration options: [Floppy] [MO/
LS120] [Hard Disk] [CDROM] [ZIP100] [USB-FDD] [USB-ZIP] [USB-CDROM]
[LAN] [Disabled]
Boot Other Device [Enabled]
Allows you to enable other device boot. Configuration options: [Enabled] [Disabled]
Boot Up Floppy Seek [Disabled]
When [Enabled], the BIOS will seek the flopy disk drive to determine whether the
drive has 40 or 80 tracks. Configuration options: [Disabled] [Enabled]
Boot Up Num-Lock [On]
Allows you to select the power-on state for the NumLock.
Configuration options: [Off] [On]
Security Option [Setup]
Select [Setup], the system will boot, but access to Setup will be denied if the
correct password is not entered at the prompt. Select [System], the system can
not boot and access to Setup page will be denied if the correct password is not
entered at the prompt.
HDD S.M.A.R.T. Capability [Disabled]
Enables or disables Hard Disk SMART capability support.
Configuration options: [Disabled] [Enabled]
i915GV-INA 2-9