Advantech INTEL PCM-9587 User Manual
  1. Manuals
  2. Brands
  3. Advantech Manuals
  4. Motherboard
  5. INTEL PCM-9587
  6. User manual
Advantech INTEL PCM-9587 User Manual

Advantech INTEL PCM-9587 User Manual

Onboard intel celeron m ebx sbc with audio, vga, lcd, sata
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User Manual
PCM-9587
Onboard Intel® Celeron M EBX
SBC with Audio, VGA, LCD,
SATA

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the INTEL PCM-9587 and is the answer not in the manual?

Questions and answers

Related Manuals for Advantech INTEL PCM-9587

Summary of Contents for Advantech INTEL PCM-9587

  • Page 1 User Manual PCM-9587 Onboard Intel® Celeron M EBX SBC with Audio, VGA, LCD, SATA...
  • Page 2 The documentation and the software included with this product are copyrighted 2008 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice.

  • Page 3: Optional Accessories

    Packing List Before you begin installing your card, please make sure that the following materials have been shipped: •1 PCM-9587 all-in-one single board computer •1 CD disk for utility and drivers •1 startup manual •1 Mini Jumper*10 PCS Package (p/n: 9689000002) 1 ATX power cable (p/n:1700001112) 1 X Heatsink (50*50*30mm) If any of these items are missing or damaged, contact your distributor or sales repre-...

  • Page 4: Declaration Of Conformity

    Discard used batteries according to the manufacturer’s instructions. Technical Support and Assistance Visit the Advantech web site at www.advantech.com/support where you can find the latest information about the product. Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance. Please have the following information ready before you call: –...

  • Page 5: Table Of Contents

    Contents Chapter General Information Introduction ... 2 Features ... 2 Specifications ... 2 Board layout: dimensions... 4 Chapter Installation...5 Jumpers ... 6 2.1.1 Connectors... 8 Locating jumpers and Connectors ... 9 Setting Jumpers ... 10 Clear CMOS (J3)... 10 Installing DIMMs... 11 IDE, CDROM hard drive connector (CN15) ...
  • Page 6 2.20 USB connectors (CN18,CN20) ... 16 2.21 LCD Backlight connector (CN1)... 16 2.22 SATA Connector (CN23, CN24) ... 16 2.23 DIO connector (CN19) ... 16 2.24 -12V and -5V connector (CN6) ... 16 2.25 Extension SMBUS connector (CN26) ... 16 2.26 System FAN connector (CN13) ...
  • Page 7 Chapter Audio Setup Introduction ... 36 Driver installation... 36 6.2.1 6.2.2 Chapter Introduction ... 40 Features ... 40 Installation of Ethernet Driver... 40 7.3.1 Further information... 46 Appendix A Programming the GPIO and Watchdog Timer Supported GPIO Register ... 48 A.1.1 A.1.2 Watchdog programming...
  • Page 8 B.16 Printer Port Connector (CN16)... 57 B.17 USB Connector (CN18,20) ... 58 B.18 DIO Connector (CN19) ... 58 B.19 COM Port Connector (CN21)... 59 B.20 Front Panel Connector (CN22) ... 60 B.21 SATA Connector 1 (CN23) ... 60 B.22 SATA Connector 2 (CN24) ... 61 B.23 CPU FAN Connector (CN25) ...

  • Page 9: Chapter 1 General Information

    Chapter General Information This chapter gives background information on the PCM-9587. Sections include: Introduction Features Specifications Board layout and dimensions...

  • Page 10: Introduction

    Introduction The PCM-9587 series is a EBX SBC (Single Board Computer) designed with the powerful Intel Celeron M processor, and Intel 852GM and 6300ESB chipsets, which supports Dynamic Video Memory Technology For maximum performance. PCM- 9587 also supports one 184 PIN DIMM socket for ECC DDR memory up to 1GB. These chipsets are specifically for embedded computing and provide an optimized on-board integrated graphics solution.
  • Page 11 Watchdog timer: Winbond W83627, 255 levels timer interval, setup by soft- ware USB: Four USB 2.0 compliant host ports IrDA: N/A GPIO: 8-bit general purpose input/output Expansion: PC/104 Plus(support 8bit ISA, not support ISA DMA mode), PCI and miniPCI Solid State Disk Supports one 50-pin socket for CFC type I/II VGA/LCD Interface Chipset: Intel 852GM...

  • Page 12: Figure 1.1 Board Layout: Dimensions (Component Side)

    Board layout: dimensions Figure 1.1 Board layout: dimensions (component side) Figure 1.2 Board layout: dimensions (solder side) PCM-9587 User Manual...

  • Page 13: Chapter 2 Installation

    Chapter Installation This chapter explains the setup procedures of PCM-9587 hard- ware, including instructions on setting jumpers and connecting peripherals, switches and indica- tors. Be sure to read all safety pre- cautions before you begin the installation procedure.

  • Page 14: Table 2.4: J3: Clear Cmos Function Select

    Jumpers The PCM-9587 has a number of jumpers that allow you to configure your system to suit your application. The table below lists the functions of the various jumpers. Table 2.1: Jumpers Label 2.1.1 Jumpers setting drawing Table 2.2: J1: LCD Voltage Select Table 2.3: J2: PC104+ VIO Select Table 2.4: J3: Clear CMOS function Select 1-2 Open...

  • Page 15: Table 2.5: J5: Com2 Rs 232/422/485 Select

    Table 2.5: J5: COM2 RS 232/422/485 Select PINS RS-232 Open Open Close Close 8,10 Close 9,11 Open 10,12 Open 13,15 Close 14,16 Close 15,17 Open 16,18 Open 2 ....1 8 ○ ○ RS-232 □...

  • Page 16: Table 2.6: Connectors

    Connectors On-board connectors link the PCM-9587 to external devices such as hard disk drives, a keyboard, or floppy drives. The table below lists the function of each of the board’s connectors. Table 2.6: Connectors Label CN10 CN11 CN12 CN13 CN14 CN15 CN16 CN17...

  • Page 17: Figure 2.1 Jumper & Connector (Component Side)

    Locating jumpers and Connectors Figure 2.1 Jumper & Connector (component side) Figure 2.2 Jumper & Connector (solder side) PCM-9587 User Manual...

  • Page 18: Setting Jumpers

    Setting Jumpers You may configure your card to match the needs of your application by setting jump- ers. A jumper is a metal bridge used to close an electric circuit. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them.

  • Page 19: Installing Dimms

    Installing DIMMs The procedure for installing DIMMs is described below. Please follow these steps carefully. The number of pins are different on either side of the breaks, so the module can only fit in one way. DIMM modules have different pin contacts on each side, and therefore have a higher pin density.

  • Page 20: Floppy Drive Connector (Cn14)

    Floppy drive connector (CN14) You can attach up to two floppy drives to the PCM-9587’s on-board controller. This is useful with 34 pin dual FDD cable (part no:1701340603). You can use any combination of 5.25”(360 KB and 1.2MB) and/or 3.5”(720 KB, 1.44MB, and 2.88 MB) drives.

  • Page 21: Front Panel Connector (Cn22)

    2.12 Front Panel Connector (CN22) Next, you may want to install external switches to monitor and control the PCM-9587. These features are optional: install them only if you need them. The Front Panel con- nector (CN22) is a 14-pin male, dual in-line header. It provides connections for a hard disk access indicator, LAN Act., LAN Link, hardware reset, ATX power ON/OFF switch connector, and power on indicator.

  • Page 22: Audio Ac'97 Link Interfaces (Cn4)

    2.15 Audio AC'97 Link interfaces (CN4) The PCM-9587 is equipped with a high quality audio interface, which provides 16-bit CD-quality recording and playback as well as OPL3 compatible FM music. It is sup- ported by all major operating systems and is completely compatible with Sound Blaster Pro.

  • Page 23: Table 2.7: Cn9: Dvi Connector

    2.17.3 DVI LCD panel connector(CN9) Digital Visual Interface (DVI) is the standard interface for high-performance connec- tion between PCs and Flat Panel Displays, Digital CRT displays, Projectors, and HDTV. The PCM-9587 is able to drive a DVI connector display at a pixel resolution up to 1600 x 1200 at 85Hz.

  • Page 24: Table 2.8: Cn18: Usb Port 3/4

    2.20 USB connectors (CN18,CN20) The PCM-9587 board provides up to four USB (Universal Serial Bus) 2.0 ports. This gives complete Plug and Play, and hot attach/detach for up to 127 external devices. The USB interfaces comply with USB specification Rev. 1.1, and are fuse protected. The PCM-9587 support three 5 x2 pin USB3,4(CN18).

  • Page 25: Table 2.10: Cn13: System Fan Connector

    2.26 System FAN connector (CN13) The board supports one system housing cooling fan connector on the motherboard. The connector is 3-pin headers and support fan speed monitoring. A temperature monitor detects the internal system temperatures, which is displayed in the PC Health section of the CMOS Setup Utility.
  • Page 26 PCM-9587 User Manual...

  • Page 27: Chapter 3 Software Configuration

    Chapter Software Configuration This chapter details the software configuration information. It shows you how to configure the card to match your application requirements. The AWARD Sys- tem BIOS is covered in Chapter 4. Sections include: Introduction Connections for standard LCDs Ethernet interface configura- tion.

  • Page 28: Table 3.1: Connections To Lcd/ Flat Panel (Cn8)

    Introduction The PCM-9587 system BIOS and custom drivers are located in a 512 Kbyte, Flash ROM device, designated U6. A single Flash chip holds the system BIOS, VGA BIOS and network Boot ROM image. The display can be configured via CMOS settings. This method minimizes the number of chips and difficulty of configuration.

  • Page 29: Award Bios Setup

    Chapter Award BIOS Setup This chapter describes how to set BIOS configuration data.

  • Page 30: Figure 4.1 Bios Setup Program Initial Screen

    System test and initialization These routines test and initialize board hardware. If the routines encounter an error during the tests, you will either hear a few short beeps or see an error message on the screen. There are two kinds of errors: fatal and non-fatal. The system can usually continue the boot up sequence with non-fatal errors.

  • Page 31: Figure 4.3 Advanced Bios Features Setup

    4.2.2 Standard CMOS Features setup When you choose the Standard CMOS Features option from the Initial Setup Screen menu, the screen shown below is displayed. This standard Setup Menu allows users to configure system components such as date, time, hard disk drive, floppy drive and display.

  • Page 32: Figure 4.4 Advanced Chipset Features Setup

    4.2.4 Advanced Chipset Features setup By choosing the Advanced Chipset Features option from the Initial Setup Screen menu, the screen below is displayed. This sample screen contains the manufac- turer’s default values for the PCM-9587 Series. Figure 4.4 Advanced Chipset Features setup 4.2.5 Integrated Peripherals Choosing the Integrated Peripherals option from the Initial Setup Screen menu...

  • Page 33: Figure 4.6 Power Management Setup

    4.2.6 Power Management Setup By choosing the Power Management Setup option from the Initial Setup Screen menu, the screen below is displayed. This sample screen contains the manufac- turer’s default values for the PCM-9587 Series. Figure 4.6 Power Management Setup 4.2.7 PnP/PCI Configurations By choosing the PnP/PCI Configurations option from the Initial Setup Screen menu,...

  • Page 34: Figure 4.9 Frequency/Voltage Control

    4.2.8 PC Health Status The PC Health Status option displays information such as CPU and motherboard temperatures, fan speeds, and core voltage. 4.2.9 Frequency/Voltage Control By choosing the Frequency/Voltage Control option from the Initial Setup Screen menu, the screen below is displayed. This sample screen contains the manufac- turer’s default values for the PCM-9587.

  • Page 35: Figure 4.10Load Optimized Defaults

    4.2.10 Load Optimized Defaults Figure 4.10 Load Optimized Defaults Load Optimized Defaults loads the default system values directly from ROM. If the stored record created by the Setup program should ever become corrupted (and therefore unusable), these defaults will load automatically when you turn the PCM- 9587 Series system on.

  • Page 36: Save & Exit Setup

    To Change Password Choose the Set Password option from the CMOS Setup Utility main menu and press <Enter>. When you see “Enter Password,” enter the existing password and press <Enter>. You will see “Confirm Password” Type it again, and press <Enter>. Select Set Password again, and at the “Enter Password”...

  • Page 37: Chapter 5 Pci Graphic

    Chapter PCI Graphic Sections include: Introduction Installation of PCI Graphic driv- ers - for Windows 2000/XP Further information...

  • Page 38: Introduction

    Introduction The PCM-9587 has an onboard PCI/AGP flat panel/VGA interface. The specifications and features are described as follows: 5.1.1 Chipset The PCM-9587 uses a Intel Montara-GM/GM+ GMCH chipset for its graphic controller. It sup- ports LVDS LCD displays, conventional analog CRT monitors, DVI connection, and TV-out function.
  • Page 39 PCM-9587 User Manual...

  • Page 40: Installation Of The Pci Graphic Driver

    Installation of the PCI Graphic driver Complete the following steps to install the PCI graphic driver. Follow the procedures in the flow chart that apply to the operating system that you are using within your PCM-9587. Note! The windows illustrations in this chapter are intended as examples only.
  • Page 41 PCM-9587 User Manual...

  • Page 42: Further Information

    Further Information For further information about the AGP/VGA installation in your PCM-9587, including driver updates, troubleshooting guides and FAQ lists, visit the following web resources: Advantech websites: PCM-9587 User Manual www.advantech.com www.advantech.com.tw...

  • Page 43: Chapter 6 Audio Setup

    Chapter Audio Setup The PCM-9587 is equipped with an audio interface that records and plays back CD-quality audio. This chapter provides instructions for installing the software drivers included on the audio driver dis- kettes.

  • Page 44: Introduction

    Introduction The PCM-9587's on-board audio interface provides high-quality stereo sound and FM music synthesis (ESFM) by using the Intel 6300ESB audio controller. The audio interface can record, compress, and play back voice, sound, and music with built-in mixer control. Driver installation 6.2.1 Before you begin Please read the instructions in this chapter carefully before you attempt installation.
  • Page 45 In the Hardware Update Wizard window, click "Next". PCM-9587 User Manual...
  • Page 46 In the following Hardware Update Wizard window, click "Finish" for Windows to complete audio driver installation. PCM-9587 User Manual...

  • Page 47: Chapter 7 Lan Configuration

    Chapter LAN Configuration Sections include: Introduction Features Installation of Ethernet Driver - Windows 2000 Drivers Setup Steps - Windows NT Drivers Setup Steps - Windows Wake-on-LAN Setup...

  • Page 48: Introduction

    Introduction The PCM-9587 is equipped with a high-performance 32-bit Ethernet chipset which is fully compliant with IEEE 802.3 100 Mbps CSMA/CD standards. It is supported by major network operating systems. It is also both 100Base-T and 10Base-T compati- ble. Features Intel®...
  • Page 49 Click “Add new hardware wizard” and prepare to install networkfunction PCM-9587 User Manual...
  • Page 50 Choose Hardware Device “Ethernet Controller”. PCM-9587 User Manual...
  • Page 51 PCM-9587 User Manual...
  • Page 52 Insert the CD into D: drive a. Fill in the Find the LAN chipset folder at the directory of PCM-9587 win2000 folder from CD ROM drive b. Click “OK”. Choose the "Intel(R) GD82559ER PCI Adapter" item. Click “Next”. PCM-9587 User Manual...
  • Page 53 PCM-9587 User Manual...

  • Page 54: Further Information

    Make sure the configurations of relative items are set correctly b. Click “Next” button Click “Finish” to close this wizard. Further information Intel website: www.intel.com Advantech websites: www.advantech.com www.advantech.com.tw PCM-9587 User Manual...

  • Page 55: Programming The Gpio And Watchdog Timer

    Appendix Programming the GPIO and Watchdog Timer The PCM-9587 is equipped with a watchdog timer that resets the CPU or generates an interrupt if processing comes to a standstill for any reason. This feature ensures system reliability in industrial standalone or unmanned environments.

  • Page 56: A.1.1 Gpio Registers

    Supported GPIO Register Below are detailed descriptions of the GPIO addresses and a programming sample. A.1.1 GPIO Registers CRF0 (GP10-GP17 I/O selection register. Default 0xFF) When set to a '1', respective GPIO port is programmed as an input port. When set to a '0', respective GPIO port is programmed as an output port. CRF1 (GP10-GP17 data register.
  • Page 57 MOV AL,F2H; OUT DX,AL MOV DX,2FH MOV AL,00H;Set GPIO is normal not inverter OUT DX,AL; MOV DX,2EH MOV AL,F1H OUT DX,AL MOV DX,2FH MOV AL,**H; Put the output value into AL **H OUT DX,AL --------------------------------------------------------------------------------------------------------------- Exit extended function mode | --------------------------------------------------------------------------------------------------------------- MOV DX,2EH MOV AL,AAH...

  • Page 58: A.2 Watchdog Programming

    Watchdog programming Bellow is a sample of programming code for controlling the Watchdog Timer function. --------------------------------------------------------------------------------------------------------------- Enter the extended function mode, interruptible double-write | --------------------------------------------------------------------------------------------------------------- MOV DX,2EH MOV AL,87H OUT DX,AL OUT DX,AL --------------------------------------------------------------------------------------------------------------- Configured logical device 8, configuration register CRF6 | --------------------------------------------------------------------------------------------------------------- MOV DX,2EH MOV AL,07H;...

  • Page 59: Appendix B Pin Assignments

    Appendix Pin Assignments This appendix provides special- ized information regarding:...

  • Page 60: Table B.2: Tv Out Connector (Cn2) (Tv Out Optional By Request

    LCD Backlight Connector (CN1) Table B.1: LCD Backlight Connector (CN1) TV Out Connector (CN2) (TV out optional by request) Table B.2: TV Out Connector (CN2) (TV out optional by request) CD-IN Connector (CN3) Table B.3: CD-IN Connector (CN3) PCM-9587 User Manual Signal +12 V LVDS_BKLTEN...

  • Page 61: Table B.4: Audio Output Connector (Cn4)

    Audio Output Connector (CN4) Table B.4: Audio Output Connector (CN4) Signal SPK_R+ SPK_L+ LOUT_R A_GND LIN_R A_GND MIC_R Power input Connector (CN5) Table B.5: Power input Connector (CN5) Signal -12V and -5V Connector (CN6) Table B.6: -12V and -5V Connector (CN6) Signal SPK_R- SPK_L-...

  • Page 62: Table B.7: Vga Connector (Cn7)

    VGA Connector (CN7) Table B.7: VGA Connector (CN7) Signal VGA_R VGA_G VGA_B LVDS Connector (CN8) Table B.8: CN8 LVDS connector Signal VDD_FP VDD_FP YAM0 YAP0 YAM1 YAP1 YAM2 YAP2 CLKAM CLKAP DCLK YAM3 YAP3 BKLTEN PCM-9587 User Manual Signal VGA_VCC VGA_DATA VGA_HS VGA_VS...

  • Page 63: Table B.10:Gigabit Lan Connector (Cn10)

    DVI Connector (CN9) Table B.9: DVI Connector (CN9) Signal VCC_DVI B.10 Gigabit LAN Connector (CN10 Optional) Table B.10: Gigabit LAN Connector (CN10) Signal RJ45_7 RJ45_4 RJ45_3 RJ45_1 B.11 10/100M LAN Connector (CN11) Table B.11: 10/100M LAN Connector (CN11) Signal VCC_LAN ACTLED LILED Signal...

  • Page 64: Table B.14:Floppy Disk Drive Connector (Cn14)

    B.12 Gigabit LAN LED Connector (CN12 Optional) Table B.12: Gigabit LAN LED Connector (CN12) Signal VCC_LAN25 LINK LINK100 B.13 System FAN Connector (CN13) Table B.13: System FAN Connector (CN13) B.14 Floppy Disk Drive Connector (CN14) Table B.14: Floppy Disk Drive Connector (CN14) Signal PCM-9587 User Manual Signal...

  • Page 65: Table B.16:Printer Port Connector (Cn16)

    B.15 Primary HDD Connector (CN15) Table B.15: Primary HDD Connector (CN15) Signal Reset DREQ DIOW DIOR IORDY DACK IDE IRQ14 ADDR 1 ADDR 0 DASP B.16 Printer Port Connector (CN16) Table B.16: Printer Port Connector (CN16) Signal STROBE* ACK* BUSY SLCT * low active Signal...

  • Page 66: Table B.17:Usb Connector (Cn18,20)

    B.17 USB Connector (CN18,20) Table B.17: USB Connector (CN18,20) Signal +5 V UV0-/2-/4- UV0+/2+/4+ B.18 DIO Connector (CN19) Table B.18: DIO Connector (CN19) Signal DIO IN0 DIO IN1 DIO IN2 DIO IN3 PCM-9587 User Manual Signal +5 V UV1-/3-/5- UV1+/3+/5+ Signal DIO OUT0 DIO OUT1...

  • Page 67: Table B.19:Com Port Connector (Cn21)

    B.19 COM Port Connector (CN21) Table B.19: COM Port Connector (CN21) Signal COM1 DCD COM1 RX COM1 TX COM1 DTR COM2 DCD/485TX- COM2 RX /485TX+ COM2 TX /485RX+ COM2 DTR/485RX- COM3 DCD COM3 RX COM3 TX COM3 DTR COM4 DCD COM4 RX COM4 TX COM4 DTR...

  • Page 68: Table B.20:Front Panel Connector (Cn22)

    B.20 Front Panel Connector (CN22) Table B.20: Front panel Connector (CN22) Signal HDD LED+ Power LED+ Suspend LED LAN ACT+ LAN Link+ VCC_DUAL B.21 SATA Connector 1 (CN23) Table B.21: SATA Connector 1 (CN23) PCM-9587 User Manual Signal HDD LED- LAN ACT- LAN Link- ATX Power Button...

  • Page 69: Table B.24:Extension Smbus Connector(Cn26)

    B.22 SATA Connector 2 (CN24) Table B.22: SATA Connector 2 (CN24) B.23 CPU FAN Connector (CN25) Table B.23: CPU FAN Connector (CN25) B.24 Extension SMBUS Connector (CN26) Table B.24: Extension SMBUS Connector(CN26) Signal TX1# RX1# Signal +12V SPEED DETECT Signal SMBDATA SMBCLK 3VSB...

  • Page 70: Table B.26:Cpu Fan Connector (Wafer Box)(Optional)(Cn28)

    B.25 Keyboard and PS/2 Mouse Connector (CN27) Table B.25: Keyboard and Mouse Connector (CN27) B.26 CPU FAN Connector (wafer box)(Optional)(CN28) Table B.26: CPU FAN Connector (wafer box)(Optional)(CN28) PCM-9587 User Manual Signal KB CLOCK KB DATA MS CLOCK MS DATA Signal Detection VCC 5V...

  • Page 71: Table B.28:Compactflash Card Connector (Cn30)

    B.27 Mini PCI Connector(CN29) Table B.27: Mini PCI Connector (CN29) Signal TIP Key 8PMJ-33, 4 8PMJ-63, 4 8PMJ-73, 4 8PMJ-83, 4 LED1_GRNP LED1_GRNN CHSGND INTB# 3.3V RESERVED GROUND GROUND B.28 CompactFlash Card Connector (CN30) Table B.28: CompactFlash Card Connector (CN30) Signal SDD4 SDD6...
  • Page 72 PCM-9587 User Manual...

  • Page 73: Appendix C System Assignments

    Appendix System Assignments This Appendix contains informa- tion of a detailed nature. It includes: System I/O ports 1st MB memory map DMA channel assignments Interrupt assignments...

  • Page 74: C.1 System I/O Ports

    System I/O Ports Table C.1: System I/O Ports Addr. range (Hex) 000-01F 020-021 040-05F 060-06F 070-07F 080-09F 0A0-0BF 0C0-0DF 0F8-0FF 1F0-1F8 170- 178 200-207 278-27F 2E8-2EF 2F8-2FF 300-31F 360-36F 378-37F 380-38F 3A0-3AF 3B0-3BF 3C0-3CF 3D0-3DF 3E8-3EF 3F0-3F7 3F8-3FF * PNP audio I/O map range from 220 ~ 250H (16 bytes) MPU-401 select from 300 ~ 330H (2 bytes) PCM-9587 User Manual Device...

  • Page 75: Table C.3: Dma Channel Assignments

    1st MB memory map Table C.2: 1st MB memory map Addr. range (Hex) F0000h - FFFFFh System ROM *CC000h - EFFFFh C0000h - CBFFFh B8000h - BFFFFh B0000h - B7FFFh A0000h - AFFFFh 00000h - 9FFFFh * If Ethernet boot ROM is disabled (Ethernet ROM occupies about 16 KB) * E0000 - EFFFF is reserved for BIOS POST DMA channel assignments Table C.3: DMA channel assignments...

  • Page 76: Interrupt Assignments

    Interrupt assignments Table C.4: Interrupt assignments Interrupt# IRQ 0 IRQ 1 IRQ 2 IRQ 3 IRQ 4 IRQ 5 IRQ 6 IRQ 7 IRQ 8 IRQ 9 IRQ 10 IRQ 11 IRQ 12 IRQ 13 IRQ 14 IRQ 15 * Ethernet interface IRQ select: 9, 11, 15 * PNP audio IRQ select: 9, 11, 15 * PNP USB IRQ select: 9, 11, 15 * PNP ACPI IRQ select: 9, 11, 15...

  • Page 77: Appendix D Optional Extras For The Pcm-9587

    Appendix Optional Extras for the PCM-9587...

  • Page 78: Table D.1: Pcm-10586-6200E Wiring Kit 9587

    The PCM-9587 requires several cables for normal operation. You can make them yourself or purchase an optional cable kit assembly, which includes the following PCM-10586-6200E Cable kit for PCM-9587 Table D.1: PCM-10586-6200E wiring kit 9587 Part No. Cable Description Dual floppy, 3.5" and 1701340603 5.25"...

  • Page 79: Appendix E Mechanical Drawings

    Appendix Mechanical Drawings...

  • Page 80: E.1 Mechanical Drawings

    Mechanical Drawings Figure E.1 PCM-9587 Mechanical Drawing (component side) PCM-9587 User Manual...

  • Page 81: Figure E.2 Pcm-9587 Mechanical Drawing (Solder Side)

    Figure E.2 PCM-9587 Mechanical Drawing (solder side) PCM-9587 User Manual...
  • Page 82 No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permis- sion of the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd. 2008...

Table of Contents

Save PDF